Up Down Center Bending Center
The UpDownCenter-2 is a semi-automatic bending center for panels and boxes up to 4060 mm bending length and up to 400 mm box height. With up to 4 mm bending capacity, it is ideal for thin and medium material thicknesses. The machine can be operated from the gauging but also from the folding beam side. The optional tool changer reduces set-up times and increases productivity especially on jobs with small batch sizes. Besides the up and down folding capability and the automated PosLift part positioning system, another true highlight of the machine is the automatic one-click programming software.
| Technical Data UpDownCenter-2 (mm) | RAS 78.43-2 | RAS 78.33-2 | RAS 78.40-2 | RAS 78.30-2 |
| Bending direction | UpDown | UpDown | UpDown | UpDown |
| Working length | 4060 mm | 3200 mm | 4060 mm | 3200 mm |
| Material thickness max (400 N/mm²) | 3.0 mm | 4.0 mm | 3,0 mm. | 4.0 mm |
| Upper beam open height | 850 mm | |||
| Box height max (four-sided) | 400 mm | |||
| Gauging system | PosLift | |||
| Operation | front and rear | |||
| Tool changer | yes | no | ||
| Programming | semi automatic | |||
| Automation | high | |||
| Bending direction | up and down | |||
| Parts | Profiles and boxes | |||
UpDownCenter-2 Highlights
- Machine without tool changer (UpDownCenter-2 basic)
- Machine with tool changer (UpDownCenter-2)
- Bending up and down
- Automatic bending sequences
- Work from the gauging side or the folding beam side
- Automatic part programming
- Incredible dimensional and angle accuracy
- Bending of boxes with radii and oblique base shapes (difficult gauging)
- Bending of parts with embosses, large holes etc.
- Medium automation, large part diversity